- Call us : (+91) 987 101 4210
- Email: dpsharma74@yahoo.co.in
GI Frame ROD TYPE Pre Filter Manufacturer in Varkala Kerala India
Construction: Are Made From High Quality Synthetic Non-Woven Media, Supported By a Fine HDPE Media On Both Sides. Media Is Then Housed Inside An Extruded Aluminium Frame.
Specifications :
Efficiency : Standard HDPE Pleated Type Pre Filters Have an Efficiency of 90% for 10 Micron Size Particles. Pre Filters With An Efficiency Rating of 80 to 90% to Capture 10 Micron to 20 Micron Size Particles Are Also Available On Order.
GI Frame Rod Type Pre Filter in Bengaluru Hoodi
GI Frame ROD TYPE Pre Filter Manufacturer IN Pithapuram – 533450 Andhra Pradesh
Construction: Are Made From High Quality Synthetic Non-Woven Media,Supported By a Fine HDPE Media On Both Sides. Media Is Then Housed Inside An Extruded Aluminium Frame.
Specifications :
Efficiency : Standard HDPE Pleated Type Pre Filters Have an Efficiency of 90% for 10 Micron Size Particles. Pre Filters With An Efficiency Rating of 80 to 90% to Capture 10 Micron to 20 Micron Size Particles Are Also Available On Order.
Filtration Class : Filter Grades G3, G4, F5 of EN779, ASHRAE 52.2 Equivalent MERV 6,7,8,9,10 and Eurovent EU3, EU4 and EU5 Are Available
Frame Type : Available in Flange Or Box Type
Frame Material : Standard Model is Constructed in Galvanized Steel. Other Models With Aluminium Anodized/Stainless Steel Frame With or Without Powder Coating Are Also Available On Order.
Filter Media : HDPE And Non-Woven Synthetic.
Gasket : No Gasket is Installed in Standard Filter Model. Non-Woven Syntheti/Rubber Gasket Can Be Ordered On Request
Separators : None
Sealant : PU Based Epoxy
Face Guard : No Face Guard With Standard Model is Supplied. On Order/Request Filter Can Be Protected With Expanded Mesh On Both Sides
Nominal Depth : Depth Size is Available From 1.0 Inches to 6 Inches (Pre HDPE Pleated And Rod Type)
Sizes : Standard Size Of The Filter is 610 x 610 x 50 MM in Box or Flange Type. Other Sizes Are Build On Order.
Pressure Drop : Initial Pressure Drop ~2.5 MM WG and Recommended Final Pressure Drop is 5-10 MM WG
Operating Conditions : Filter Can Withstand Temperature Up to 80ºC And Relative Humidity of 100% at 0 Condensation. Filter is Washable or Can Be Cleaned By Applying Air Pressure And Reused.
Application :
Pre Filters Are Most Suited For:
Air Handling Units (AHUs), Air-Conditioning Systems.
Power Plants, Chemical and Fertilizer Complexes.
Green Houses, Automatic Drain Holes, Paint Shops.
Textile Mills.
Cement Factories.
Laminar Air Flow Units.
Biosafety Hoods.
Fan Filter Units (FFU).
Gas Turbine Industry.
Compressor, Diesel Engines.
Nuclear Power Station.
CD-Rom Production Industry.
Picture Tube Production Industry.
Semi-conductor Industry.
Aeronautical Industry And Miscellaneous Industrial Ventilation
GI Frame ROD TYPE Pre Filter Manufacturer IN Faridabad – 121001 Haryana India
GI Frame ROD TYPE Pre Filter Manufacturer IN Rudrapur Uttarakhand India
Construction: Are Made From High Quality Synthetic Non-Woven Media,Supported By a Fine HDPE Media On Both Sides. Media Is Then Housed Inside An Extruded Aluminium Frame.
Specifications :
Efficiency : Standard HDPE Pleated Type Pre Filters Have an Efficiency of 90% for 10 Micron Size Particles. Pre Filters With An Efficiency Rating of 80 to 90% to Capture 10 Micron to 20 Micron Size Particles Are Also Available On Order.
Filtration Class : Filter Grades G3, G4, F5 of EN779, ASHRAE 52.2 Equivalent MERV 6,7,8,9,10 and Eurovent EU3, EU4 and EU5 Are Available
Frame Type : Available in Flange Or Box Type
Frame Material : Standard Model is Constructed in Galvanized Steel. Other Models With Aluminium Anodized/Stainless Steel Frame With or Without Powder Coating Are Also Available On Order.
Filter Media : HDPE And Non-Woven Synthetic.
Gasket : No Gasket is Installed in Standard Filter Model. Non-Woven Syntheti/Rubber Gasket Can Be Ordered On Request
Separators : None
Sealant : PU Based Epoxy
Face Guard : No Face Guard With Standard Model is Supplied. On Order/Request Filter Can Be Protected With Expanded Mesh On Both Sides
Nominal Depth : Depth Size is Available From 1.0 Inches to 6 Inches (Pre HDPE Pleated And Rod Type)
Sizes : Standard Size Of The Filter is 610 x 610 x 50 MM in Box or Flange Type. Other Sizes Are Build On Order.
Pressure Drop : Initial Pressure Drop ~2.5 MM WG and Recommended Final Pressure Drop is 5-10 MM WG
Operating Conditions : Filter Can Withstand Temperature Up to 80ºC And Relative Humidity of 100% at 0 Condensation. Filter is Washable or Can Be Cleaned By Applying Air Pressure And Reused.
Application :
Pre Filters Are Most Suited For:
Air Handling Units (AHUs), Air-Conditioning Systems.
Power Plants, Chemical and Fertilizer Complexes.
Green Houses, Automatic Drain Holes, Paint Shops.
Textile Mills.
Cement Factories.
Laminar Air Flow Units.
Biosafety Hoods.
Fan Filter Units (FFU).
Gas Turbine Industry.
Compressor, Diesel Engines.
Nuclear Power Station.
CD-Rom Production Industry.
Picture Tube Production Industry.
Semi-conductor Industry.
Aeronautical Industry And Miscellaneous Industrial Ventilation
GI Frame ROD TYPE Pre Filter Manufacturer IN Dausa Rajasthan India
Construction: Are Made From High Quality Synthetic Non-Woven Media,Supported By a Fine HDPE Media On Both Sides. Media Is Then Housed Inside An Extruded Aluminium Frame.
Specifications :
Efficiency : Standard HDPE Pleated Type Pre Filters Have an Efficiency of 90% for 10 Micron Size Particles. Pre Filters With An Efficiency Rating of 80 to 90% to Capture 10 Micron to 20 Micron Size Particles Are Also Available On Order.
Filtration Class : Filter Grades G3, G4, F5 of EN779, ASHRAE 52.2 Equivalent MERV 6,7,8,9,10 and Eurovent EU3, EU4 and EU5 Are Available
Frame Type : Available in Flange Or Box Type
Frame Material : Standard Model is Constructed in Galvanized Steel. Other Models With Aluminium Anodized/Stainless Steel Frame With or Without Powder Coating Are Also Available On Order.
Filter Media : HDPE And Non-Woven Synthetic.
Gasket : No Gasket is Installed in Standard Filter Model. Non-Woven Syntheti/Rubber Gasket Can Be Ordered On Request
Separators : None
Sealant : PU Based Epoxy
Face Guard : No Face Guard With Standard Model is Supplied. On Order/Request Filter Can Be Protected With Expanded Mesh On Both Sides
Nominal Depth : Depth Size is Available From 1.0 Inches to 6 Inches (Pre HDPE Pleated And Rod Type)
Sizes : Standard Size Of The Filter is 610 x 610 x 50 MM in Box or Flange Type. Other Sizes Are Build On Order.
Pressure Drop : Initial Pressure Drop ~2.5 MM WG and Recommended Final Pressure Drop is 5-10 MM WG
Operating Conditions : Filter Can Withstand Temperature Up to 80ºC And Relative Humidity of 100% at 0 Condensation. Filter is Washable or Can Be Cleaned By Applying Air Pressure And Reused.
Application :
Pre Filters Are Most Suited For:
Air Handling Units (AHUs), Air-Conditioning Systems.
Power Plants, Chemical and Fertilizer Complexes.
Green Houses, Automatic Drain Holes, Paint Shops.
Textile Mills.
Cement Factories.
Laminar Air Flow Units.
Biosafety Hoods.
Fan Filter Units (FFU).
Gas Turbine Industry.
Compressor, Diesel Engines.
Nuclear Power Station.
CD-Rom Production Industry.
Picture Tube Production Industry.
Semi-conductor Industry.
Aeronautical Industry And Miscellaneous Industrial Ventilation
GI Frame ROD TYPE Pre Filter Manufacturer IN Ludhiana – 141119 Punjab India
Construction: Are Made From High Quality Synthetic Non-Woven Media,Supported By a Fine HDPE Media On Both Sides.Media Is Then Housed Inside An Extruded Aluminium Frame.
Specifications :
Efficiency : Standard HDPE Pleated Type Pre Filters Have an Efficiency of 90% for 10 Micron Size Particles.Pre Filters With An Efficiency Rating of 80 to 90% to Capture 10 Micron to 20 Micron Size Particles Are Also Available On Order.
Filtration Class : Filter Grades G3, G4, F5 of EN779, ASHRAE 52.2 Equivalent MERV 6,7,8,9,10 and Eurovent EU3, EU4 and EU5 Are Available
Frame Type : Available in Flange Or Box Type
Frame Material : Standard Model is Constructed in Galvanized Steel. Other Models With Aluminium Anodized/Stainless Steel Frame With or Without Powder Coating Are Also Available On Order.
Filter Media : HDPE And Non-Woven Synthetic.
Gasket : No Gasket is Installed in Standard Filter Model.Non-Woven Syntheti/Rubber Gasket Can Be Ordered On Request
Separators : None
Sealant : PU Based Epoxy
Face Guard : No Face Guard With Standard Model is Supplied.On Order/Request Filter Can Be Protected With Expanded Mesh On Both Sides
Nominal Depth : Depth Size is Available From 1.0 Inches to 6 Inches (Pre HDPE Pleated And Rod Type)
Sizes : Standard Size Of The Filter is 610 x 610 x 50 MM in Box or Flange Type. Other Sizes Are Build On Order.
Pressure Drop : Initial Pressure Drop ~2.5 MM WG and Recommended Final Pressure Drop is 5-10 MM WG
Operating Conditions : Filter Can Withstand Temperature Up to 80ºC And Relative Humidity of 100% at 0 Condensation.Filter is Washable or Can Be Cleaned By Applying Air Pressure And Reused.
Application :
Pre Filters Are Most Suited For:
Air Handling Units (AHUs), Air-Conditioning Systems.
Power Plants, Chemical and Fertilizer Complexes.
Green Houses, Automatic Drain Holes, Paint Shops.
Textile Mills.
Cement Factories.
Laminar Air Flow Units.
Biosafety Hoods.
Fan Filter Units (FFU).
Gas Turbine Industry.
Compressor, Diesel Engines.
Nuclear Power Station.
CD-Rom Production Industry.
Picture Tube Production Industry.
Semi-conductor Industry.
Aeronautical Industry And Miscellaneous Industrial Ventilation
GI Frame ROD TYPE Pre Filter Manufacturer IN Mansarover Park Shahdara East Delhi – 110032
Aeronautical Industry And Miscellaneous Industrial Ventilation
GI Frame ROD TYPE Pre Filter Manufacturer IN Tadepalligudem Andhra Pradesh India
Construction: Are Made From High Quality Synthetic Non-Woven Media,Supported By a Fine HDPE Media On Both Sides.Media Is Then Housed Inside An Extruded Aluminium Frame.
Specifications :
Efficiency : Standard HDPE Pleated Type Pre Filters Have an Efficiency of 90% for 10 Micron Size Particles.Pre Filters With An Efficiency Rating of 80 to 90% to Capture 10 Micron to 20 Micron Size Particles Are Also Available On Order.
Filtration Class : Filter Grades G3, G4, F5 of EN779, ASHRAE 52.2 Equivalent MERV 6,7,8,9,10 and Eurovent EU3, EU4 and EU5 Are Available
Frame Type : Available in Flange Or Box Type
Frame Material : Standard Model is Constructed in Galvanized Steel. Other Models With Aluminium Anodized/Stainless Steel Frame With or Without Powder Coating Are Also Available On Order.
Filter Media : HDPE And Non-Woven Synthetic.
Gasket : No Gasket is Installed in Standard Filter Model.Non-Woven Syntheti/Rubber Gasket Can Be Ordered On Request
Separators : None
Sealant : PU Based Epoxy
Face Guard : No Face Guard With Standard Model is Supplied.On Order/Request Filter Can Be Protected With Expanded Mesh On Both Sides
Nominal Depth : Depth Size is Available From 1.0 Inches to 6 Inches (Pre HDPE Pleated And Rod Type)
Sizes : Standard Size Of The Filter is 610 x 610 x 50 MM in Box or Flange Type. Other Sizes Are Build On Order.
Pressure Drop : Initial Pressure Drop ~2.5 MM WG and Recommended Final Pressure Drop is 5-10 MM WG
Operating Conditions : Filter Can Withstand Temperature Up to 80ºC And Relative Humidity of 100% at 0 Condensation.Filter is Washable or Can Be Cleaned By Applying Air Pressure And Reused.
Application :
Pre Filters Are Most Suited For:
Air Handling Units (AHUs), Air-Conditioning Systems.
Power Plants, Chemical and Fertilizer Complexes.
Green Houses, Automatic Drain Holes, Paint Shops.
Textile Mills.
Cement Factories.
Laminar Air Flow Units.
Biosafety Hoods.
Fan Filter Units (FFU).
Gas Turbine Industry.
Compressor, Diesel Engines.
Nuclear Power Station.
CD-Rom Production Industry.
Picture Tube Production Industry.
Semi-conductor Industry.
Aeronautical Industry And Miscellaneous Industrial Ventilation
GI Frame ROD TYPE Pre Filter Manufacturer IN Meerut Uttar Pradesh India
GI Frame ROD TYPE Pre Filter Manufacturer IN JAUNPUR UTTAR PRADESH
GI Frame ROD TYPE Pre Filter Manufacturer From AHMEDABAD GUJARAT
GI Frame ROD TYPE Pre Filter Manufacturer IN Uttar Durgapur West Bengal
GI Frame ROD TYPE Pre Filter Manufacturer IN Navrangpura Ahmedabad – 380009 Gujarat India
GI Frame ROD TYPE Pre Filter Manufacturer IN Bikaner Rajasthan
Construction: Are Made From High Quality Synthetic Non-Woven Media,Supported By a Fine HDPE Media On Both Sides.Media Is Then Housed Inside An Extruded Aluminium Frame.
Specifications :
Efficiency : Standard HDPE Pleated Type Pre Filters Have an Efficiency of 90% for 10 Micron Size Particles.Pre Filters With An Efficiency Rating of 80 to 90% to Capture 10 Micron to 20 Micron Size Particles Are Also Available On Order.
Filtration Class : Filter Grades G3, G4, F5 of EN779, ASHRAE 52.2 Equivalent MERV 6,7,8,9,10 and Eurovent EU3, EU4 and EU5 Are Available
Frame Type : Available in Flange Or Box Type
Frame Material : Standard Model is Constructed in Galvanized Steel. Other Models With Aluminium Anodized/Stainless Steel Frame With or Without Powder Coating Are Also Available On Order.
Filter Media : HDPE And Non-Woven Synthetic.
Gasket : No Gasket is Installed in Standard Filter Model.Non-Woven Syntheti/Rubber Gasket Can Be Ordered On Request
Separators : None
Sealant : PU Based Epoxy
Face Guard : No Face Guard With Standard Model is Supplied.On Order/Request Filter Can Be Protected With Expanded Mesh On Both Sides
Nominal Depth : Depth Size is Available From 1.0 Inches to 6 Inches (Pre HDPE Pleated And Rod Type)
Sizes : Standard Size Of The Filter is 610 x 610 x 50 MM in Box or Flange Type. Other Sizes Are Build On Order.
Pressure Drop : Initial Pressure Drop ~2.5 MM WG and Recommended Final Pressure Drop is 5-10 MM WG
Operating Conditions : Filter Can Withstand Temperature Up to 80ºC And Relative Humidity of 100% at 0 Condensation.Filter is Washable or Can Be Cleaned By Applying Air Pressure And Reused.
Application :
Pre Filters Are Most Suited For:
Air Handling Units (AHUs), Air-Conditioning Systems.
Power Plants, Chemical and Fertilizer Complexes.
Green Houses, Automatic Drain Holes, Paint Shops.
Textile Mills.
Cement Factories.
Laminar Air Flow Units.
Biosafety Hoods.
Fan Filter Units (FFU).
Gas Turbine Industry.
Compressor, Diesel Engines.
Nuclear Power Station.
CD-Rom Production Industry.
Picture Tube Production Industry.
Semi-conductor Industry.
Aeronautical Industry And Miscellaneous Industrial Ventilation
GI Frame ROD TYPE Pre Filter Manufacturer IN Varanavasi Village Tamil Nadu
GI Frame ROD TYPE Pre Filter Manufacturer IN Mumbai Maharashtra
GI Frame ROD TYPE Pre Filter Manufacturer IN LAMINGTON ROAD MUMBAI-400004
GI Frame ROD TYPE Pre Filter Manufacturer IN KOLKATA WB INDIA
GI Frame ROD TYPE Pre Filter Manufacturer IN MUMBAI MH INDIA
GI Frame ROD TYPE Pre Filter Manufacturer IN VISAKHAPATNAM AP INDIA
Construction: Are Made From High Quality Synthetic Non-Woven Media,Supported By a Fine HDPE Media On Both Sides.Media Is Then Housed Inside An Extruded Aluminium Frame.
Specifications :
Efficiency : Standard HDPE Pleated Type Pre Filters Have an Efficiency of 90% for 10 Micron Size Particles.Pre Filters With An Efficiency Rating of 80 to 90% to Capture 10 Micron to 20 Micron Size Particles Are Also Available On Order.
Filtration Class : Filter Grades G3, G4, F5 of EN779, ASHRAE 52.2 Equivalent MERV 6,7,8,9,10 and Eurovent EU3, EU4 and EU5 Are Available
Frame Type : Available in Flange Or Box Type
Frame Material : Standard Model is Constructed in Galvanized Steel. Other Models With Aluminium Anodized/Stainless Steel Frame With or Without Powder Coating Are Also Available On Order.
Filter Media : HDPE And Non-Woven Synthetic.
Gasket : No Gasket is Installed in Standard Filter Model.Non-Woven Syntheti/Rubber Gasket Can Be Ordered On Request
Separators : None
Sealant : PU Based Epoxy
Face Guard : No Face Guard With Standard Model is Supplied.On Order/Request Filter Can Be Protected With Expanded Mesh On Both Sides
Nominal Depth : Depth Size is Available From 1.0 Inches to 6 Inches (Pre HDPE Pleated And Rod Type)
Sizes : Standard Size Of The Filter is 610 x 610 x 50 MM in Box or Flange Type. Other Sizes Are Build On Order.
Pressure Drop : Initial Pressure Drop ~2.5 MM WG and Recommended Final Pressure Drop is 5-10 MM WG
Operating Conditions : Filter Can Withstand Temperature Up to 80ºC And Relative Humidity of 100% at 0 Condensation.Filter is Washable or Can Be Cleaned By Applying Air Pressure And Reused.
Application :
Pre Filters Are Most Suited For:
Air Handling Units (AHUs), Air-Conditioning Systems.
Power Plants, Chemical and Fertilizer Complexes.
Green Houses, Automatic Drain Holes, Paint Shops.
Textile Mills.
Cement Factories.
Laminar Air Flow Units.
Biosafety Hoods.
Fan Filter Units (FFU).
Gas Turbine Industry.
Compressor, Diesel Engines.
Nuclear Power Station.
CD-Rom Production Industry.
Picture Tube Production Industry.
Semi-conductor Industry.
Aeronautical Industry And Miscellaneous Industrial Ventilation
GI Frame ROD TYPE Pre Filter Manufacturer IN NOIDA UP INDIA
GI Frame ROD TYPE Pre Filter Manufacturer IN PANCHKULA HARYANA
GI Frame ROD TYPE Pre Filter Manufacturer IN CHAS JHARKHAND
GI Frame ROD TYPE Pre Filter Manufacturer IN Sitamarhi Bihar
Construction: Are Made From High Quality Synthetic Non-Woven Media,Supported By a Fine HDPE Media On Both Sides.Media Is Then Housed Inside An Extruded Aluminium Frame.
Specifications :
Efficiency : Standard HDPE Pleated Type Pre Filters Have an Efficiency of 90% for 10 Micron Size Particles.Pre Filters With An Efficiency Rating of 80 to 90% to Capture 10 Micron to 20 Micron Size Particles Are Also Available On Order.
Filtration Class : Filter Grades G3, G4, F5 of EN779, ASHRAE 52.2 Equivalent MERV 6,7,8,9,10 and Eurovent EU3, EU4 and EU5 Are Available
Frame Type : Available in Flange Or Box Type
Frame Material : Standard Model is Constructed in Galvanized Steel. Other Models With Aluminium Anodized/Stainless Steel Frame With or Without Powder Coating Are Also Available On Order.
Filter Media : HDPE And Non-Woven Synthetic.
Gasket : No Gasket is Installed in Standard Filter Model.Non-Woven Syntheti/Rubber Gasket Can Be Ordered On Request
Separators : None
Sealant : PU Based Epoxy
Face Guard : No Face Guard With Standard Model is Supplied.On Order/Request Filter Can Be Protected With Expanded Mesh On Both Sides
Nominal Depth : Depth Size is Available From 1.0 Inches to 6 Inches (Pre HDPE Pleated And Rod Type)
Sizes : Standard Size Of The Filter is 610 x 610 x 50 MM in Box or Flange Type. Other Sizes Are Build On Order.
Pressure Drop : Initial Pressure Drop ~2.5 MM WG and Recommended Final Pressure Drop is 5-10 MM WG
Operating Conditions : Filter Can Withstand Temperature Up to 80ºC And Relative Humidity of 100% at 0 Condensation.Filter is Washable or Can Be Cleaned By Applying Air Pressure And Reused.
Application :
Pre Filters Are Most Suited For:
Air Handling Units (AHUs), Air-Conditioning Systems.
Power Plants, Chemical and Fertilizer Complexes.
Green Houses, Automatic Drain Holes, Paint Shops.
Textile Mills.
Cement Factories.
Laminar Air Flow Units.
Biosafety Hoods.
Fan Filter Units (FFU).
Gas Turbine Industry.
Compressor, Diesel Engines.
Nuclear Power Station.
CD-Rom Production Industry.
Picture Tube Production Industry.
Semi-conductor Industry.
Aeronautical Industry And Miscellaneous Industrial Ventilation
GI Frame ROD TYPE Pre Filter Manufacturer - RAJKOT GUJARAT
GI Frame ROD TYPE Pre Filter Manufacturer - Banga Punjab
Construction: Are Made From High Quality Synthetic Non-Woven Media,Supported By a Fine HDPE Media On Both Sides.Media Is Then Housed Inside An Extruded Aluminium Frame.
Specifications :
Efficiency : Standard HDPE Pleated Type Pre Filters Have an Efficiency of 90% for 10 Micron Size Particles.Pre Filters With An Efficiency Rating of 80 to 90% to Capture 10 Micron to 20 Micron Size Particles Are Also Available On Order.
Filtration Class : Filter Grades G3, G4, F5 of EN779, ASHRAE 52.2 Equivalent MERV 6,7,8,9,10 and Eurovent EU3, EU4 and EU5 Are Available
Frame Type : Available in Flange Or Box Type
Frame Material : Standard Model is Constructed in Galvanized Steel. Other Models With Aluminium Anodized/Stainless Steel Frame With or Without Powder Coating Are Also Available On Order.
Filter Media : HDPE And Non-Woven Synthetic.
Gasket : No Gasket is Installed in Standard Filter Model.Non-Woven Syntheti/Rubber Gasket Can Be Ordered On Request
Separators : None
Sealant : PU Based Epoxy
Face Guard : No Face Guard With Standard Model is Supplied.On Order/Request Filter Can Be Protected With Expanded Mesh On Both Sides
Nominal Depth : Depth Size is Available From 1.0 Inches to 6 Inches (Pre HDPE Pleated And Rod Type)
Sizes : Standard Size Of The Filter is 610 x 610 x 50 MM in Box or Flange Type. Other Sizes Are Build On Order.
Pressure Drop : Initial Pressure Drop ~2.5 MM WG and Recommended Final Pressure Drop is 5-10 MM WG
Operating Conditions : Filter Can Withstand Temperature Up to 80ºC And Relative Humidity of 100% at 0 Condensation.Filter is Washable or Can Be Cleaned By Applying Air Pressure And Reused.
Application :
Pre Filters Are Most Suited For:
Air Handling Units (AHUs), Air-Conditioning Systems.
Power Plants, Chemical and Fertilizer Complexes.
Green Houses, Automatic Drain Holes, Paint Shops.
Textile Mills.
Cement Factories.
Laminar Air Flow Units.
Biosafety Hoods.
Fan Filter Units (FFU).
Gas Turbine Industry.
Compressor, Diesel Engines.
Nuclear Power Station.
CD-Rom Production Industry.
Picture Tube Production Industry.
Semi-conductor Industry.
Aeronautical Industry And Miscellaneous Industrial Ventilation
Mechanical Sifter Sieves: - Sieves for mech. shifter size of 20” and 30” and mesh size as per clients choice. In big sizes supports are provided for the rigidity and stiffness.
We manufacture SS Sifter Sieves in SS 304 and SS 316 with Silicon Molded / without Silicon molded .
We are engaged in offering our clients with a qualitative range of Pharma Sifter Sieves. These are offered in diameters of 20, 30, 40, and 48 inches and also as per the drawings from 4 meshes to 500 meshes with additional cross support of 18 SWGS. Our range is cross welded to the bottom of the ring with additional sieves. This supports sieves as per customer specifications and we also silicon mould sifter sieves using SS 316/304.
Mesh Nos |
Mesh Nos |
Indian Std |
Microns |
4 | 5 | 4.00mm | 4000 |
5 | 6 | 3.35mm | 3353 |
6 | 7 | 2.80mm | 2812 |
7 | 8 | 2.36mm | 2411 |
8 | 10 | 2.00mm | 2057 |
10 | 12 | 1.70mm | 4000 |
12 | 14 | 1.40mm | 1405 |
14 | 16 | 1.18mm | 1204 |
16 | 18 | 1.00mm | 1204 |
18 | 20 | 0.850mm | 850 |
22 | 25 | 0.710mm | 710 |
25 | 30 | 0.600mm | 600 |
30 | 35 | 0.500mm | 500 |
36 | 40 | 0.425mm | 420 |
44 | 45 | 0.355mm | 355 |
52 | 50 | 0..300mm | 300 |
60 | 60 | 0.250mm | 250 |
72 | 70 | 0.212mm | 210 |
85 | 80 | 0.180mm | 180 |
100 | 100 | 0.150mm | 150 |