Industrial Magnehelic Gauges

We are the leading manufacturer and exporter of a quality tested assortment of Industrial Magnehelic Gauges. Our range is widely used in checking the automatic valves and gas-air ratio controls, further in medical equipments also to monitor blood and respiratory pressures. Besides it is used to measure the fan and blow pressures, liquid levels and pressures in fluidic systems. Operated by a diaphragm our product is low in cost and is available in different specifications ranging from

0-10,

0-25,

0-40,

0-50,

0-100 MM Wc , And

0- 60 pA,

0-250 pA.

 

Uses : Used for high accuracy-guaranteed within 2% of full scale and for the wide choice of 81 models available to suit your needs precisely.

Differential Pressure TransmitterCost Effective for B.A.S. Applications, Digital Push-Button Calibration with One- Touch Transmitter Technology.The Series 616K & 616OT Differential Pressure Transmitters with One-Touch technology are designed for simplicity making them the ideal choice for installers and maintenance professionals.The One-Touch Differential Pressure Transmitters are cost-effective, compact transmitters that reduce up front costs as well as expenses over the life of the product.

Dwyer Make Magnehelic Differential Pressure Gauge:
Our specialization lies in offering a commendable range of Dwyer Make Magnehelic Gauge Series 2000. Manufactured with utmost care and precision at our vendors’ end using superb quality components, our offered product is highly acclaimed in the market. After being manufactured, the offered product is properly tested on defined parameters. Clients can avail the entire range from us in various Technical Specifications at industry leading prices.
Features:
Compact size

• Accuracy
• Easy installation

 

Differential Pressure Gauge
We are being counted among the most prominent manufacturers of a wide and sprawling of Differential Pressure Gauge. The offered gauge is a qualitative product of ours and has been in wide demand for its comprehensive features of sturdiness and robustness. For those precise needs, we have on offered a wide choice of 81 models.Features of this range are as follows:

• For high accuracy guaranteed within 2% of full scale
• Fast indication of low air or non corrosive gas pressure
• Can show positive, negative (vacuum) or differential pressures with ease
• Shock resistant design
• Vibration and over pressure resistant
• Inexpensive service
• No manometer fluid to evaporate, freeze or cause toxic or levelling problems

Following are the applications and pressures which it is used for measuring:

• Blower pressure
• Filter resistance
• Air velocity
• Furnace draft
• Pressure drop across orifice plates
• Liquid levels with bubble systems
• Pressures in fluid amplifier or fluidity systems
• Also checks gas-air ratio controls and automatic valves
• Monitors blood and respiratory pressures in medical care equipment

Low Cost Sensocon Differential Pressure Gauge

We are one step ahead of our competitors in supplying a wide range of Low Cost Sensocon Differential Pressure Gauge. These premium quality products are manufactured using high-grade raw material, which is obtained from the most authentic and leading vendor in the market. Skilled professionals are hired to provide proper guidelines to our staff to manufacture high quality range of these products. The product is used for various purposes in different industries like filter Status, Duct Static, Pressure Clean Room Pressure, Building Pressure,Fan and Blower Pressure.

Specifications:
Accuracy 2%

• Mounts in Industry
• Type : Arrow indicator
• Die Cast Aluminum Housing
• Standard Holes
• Temperature : 20 to 140 F

Differential Pressure Transmitter

The Dwyer provides wide variety of Pressure Transmitters. The Series 603A Differential Pressure Transmitters is a combination of super low ranges, less cost, high accuracy and durable composition which is best suited for broad range of HVAC and industrial operations. Furthermore, the transmitter supports a standard 4-20mA analog output signal with ranges as low as 0.2″w.c. The Series 616W Differential Pressure Transmitter Units are covered in polycarbonate case, rated NEMA 4X (IP66) and functions by sensing the pressure of air and accordant gases then sending a standard 4-20 mA output signal. This model allows operation in 2-wire current loops options.

Magnehelic Gauge With S.S. Enclosure

We are here to offer Magnehelic Gauge Box With S.S. Enclosure. It is designed to calibrate a broad spectrum of instruments from moving coil meters to process control systems and retain its precision over long periods in wide environmental conditions. These are customized as per as needs of clients.

Specifications:
Metal of construction S.S. 304

• Dial size: 4″
• Ranges: mm/wc,In/wc, Pascal
• Enclosure type: consul type & wall mounting
• Front panel: zero calibration gas selector switch optional

Minihelic II Differential Pressure GaugesWe have in our stores a wide assortment of Minihelic II Differential Pressure Gauges. Designed especially for panel mounting in a single 2-3/8” diameter hole, these gauges come with small size and can easily be operated up to 30 psig pressure. These gauges are manufactured by us using superior quality raw material procured by the trusted vendors of the market in accordance to international quality standards.

Features:

• Combining high accuracy
• Compactness
• Dependability

SENSOCON Digital Differential Pressure Gauge
We have in store for our clients Digital Differential Pressure Gauge.This product is appreciated amidst our global clientele for quality, low response time and its accuracy in measuring the differential pressure. Durable in nature, this product range is manufactured using the latest technology and are available to our clients at market leading prices.
Specifications :

Front Mount Differential Pressure Gauge
The Series S1000 Front Mount Differential Pressure Gauge makes panel mounting quick and easy. The S1000 is a diaphragm operated gauge for measuring positive, negative, or differential pressure. The S1000 was designed to allow quick installation saving time and money. This includes easy front mounting with 4 screws without any additional hardware required, and quick tubing connections with molded-in pressure fittings. The Series S1000 Front Mount Differential Pressure Gauge has a span adjustment on the back of the gauge for calibration adjustments. In addition to the time savings offered by the Series S1000 Differential Pressure Gauge, the gauge is based on the same rugged design as the S2000, which allows for years of trouble free operation.
Pressure Limits:
-20” Hg to 15 PSI (-0.677 bar to 1.034 bar)
Media Compatibility:
Air and compatible gasses
Accuracy:
/- 2% full scale ( /- 3% on -0 and /- 4% on -00) throughout range at 70°F (21°C)
Temperature Ranges:
20° to 140°F (-7° to 60°C)
Housing Material:
Die cast aluminum case with ABS flange and acrylic cover
Process Connection:
Duplicate high and low recessed, push on connections for 3/16” tubing – one pair side and one pair back
Weight:
1 lb 2 oz (510 g)
Accessories:
2 connection plugs, 4 mounting screws, 4 screw caps, 2 static pressure connectors, and 3 feet of vinyl tubing
Agency Approvals:
RoHS, CE

MS Flange Type Magnehelic Gauge
We are one of the topmost manufacturer, exporter and supplier of a superior quality range of MS Box Flesh type Magnehelic Gauge. These instruments are designed and made utilizing the finest grade raw material by following high definition engineering principles. Furthermore, these are widely appreciated for some of the salient features like accurate dimension, durability, superior performance and corrosion resistance. We provide these to our clients in both, standard and customized options according to the specific demands of customers.

Low-Cost Differential Pressure Gauge
With our expertise in this domain, we are able to offer Low-Cost Differential Pressure Gauge to the esteemed clients. These pressure gauges are designed and manufactured using high quality raw material and updated technology. The offered instruments can be availed by the clients in various technical specifications in order to meet their requirements.

Attributes:

• Dimensional accuracy
• Accurate reading
• High accuracy
• Compactness

Very Low Differential Pressure Gauge

Features:

• 4 Pressure Measurement from 6mmwc upto 100mmwc
• 4 Dial Sizes 4-1/2” (115mm)
• 4 Aluminium Case
• 4 Accuracy +-2% FS.
• Applications
• Filter Status
• Duct Static Pressure
• Clean Room Pressure
• Building Pressure
• Fan and Blower Pressure
• Paint Booths
• Dust Collectors
• Glove Box Pressure
• Bubbler Systems
• Cabinet Purging

Low Pressure Differential Gauge
With our expertise in this domain, we are able to offer Low Pressure Differential Gaugeto the esteemed clients. These pressure gauges are designed and manufactured using high quality raw material and updated technology. The offered instruments can be availed by the clients in various technical specifications in order to meet their requirements.

Attributes:

• Dimensional accuracy
• Accurate reading
• High accuracy
• Compactness

Mini Photohelic Differential Pressure Switch Gage
The Series MP Mini-Photohelic differential pressure switch/gage combines the time proven Minihelic II differential pressure gage with two SPDT switching setpoints. The Mini-Photohelic ® gage is designed to measure and control positive, negative, or differential pressures consisting of non-combustible and non-corrosive gases. Gage reading is independent of switch operation. Switching status is visible by LED indicators located on the front and rear of the gage. Set points are adjusted with push buttons on back of unit. This extremely compact switch/gage is ideal for fume hoods, dust collection, pneumatic conveying and clean room applications.

GI Box Magnehelic Gauge

We have been continuously indulged in supplying a high quality array of GI Magnehelic Gauge Box to our highly valued consumers. Our products are highly acclaimed for their performance and quality. These are widely execute in numerous sectors. These products are gettable at leading market prices.

SS BOX Magnehelic Gauge 

This SS-304, SS-202, stainless steel hinged box has a polished satin finish. This box has a hinged door with a face cutout to accept a Dwyer magnehelic pressure guage. Box comes complete with holes to accept pressure differential sensors. Box is fabricated with a flanged face for recess mounting.

Magnehelic Gauge
Having vast experience in the relevant industry, we are engaged in providing a broad assortment of Magnehelic Gauge that is assemble in order to meet specific demands of customers. Moreover, a series of quality tests is performed on offered gauge to ensure a defect free delivery at client’s end. Clients can avail the offered range from us at market leading prices within stipulated time frame.

Features:

Accuracy

• High functionality
• Long service life

 

Specifications:

 

• We provide magnehelic gauge of series which is low in cost, diaphragm operated and differential pressure gauge
• Owing to these features these are used in applications for measuring positive, negative, or differential pressure with an accuracy of 2%
• Besides, these are also applied for monitoring filter status, duct static pressure, room pressure, fan or blower pressure, paint booths, dust collectors, cabinet purging and many others
• We offer magnehelic differential pressure gauges which run on air and non-combustible compatible gases and are offered with the option of natural gas
• In addition to this, these housing are fabricated by using die cast aluminum case and bezel, with acrylic cover
• These have exterior finish with grey color to withstand 168 hour salt spray corrosion test

 

Specifications:

 

• Accuracy: ±2% of full scale (±3% on – 0, -100 Pa, -125 Pa, 10MM and ±4% on – 00, -60 Pa, -6MM ranges), throughout range at 70°F (21.1°C)
• Pressure Limits: -20 Hg. to 15 psig.† (-0.677 bar to 1.034 bar); MP option
• HP option: 35 psig (2.41 bar), 80 psig (5.52 bar)
• Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gages only
• Temperature Limits: 20 to 140°F.* (-6.67 to 60°C)
• Size: 4 (101.6 mm) Diameter dial face
• Mounting Orientation: Diaphragm in vertical position, Consult factory for
• Process Connections: 1/8 female NPT duplicate high and low pressure taps one pair side and one pair back
• Weight: 1 lb 2 oz (510 g), MP & HP 2 lb 2 oz (963 g)
• Other position orientations

 

Applications:

 

• Filter Status
• Duct Static Pressure
• Clean Room Pressure
• Building Pressure
• Fan and Blower Pressure
• Paint Booths
• Dust Collectors
• Glove Box Pressure
• Bubbler Systems
• Cabinet Purging

Magnehelic Differential Pressure Gauge

We offer magnehelic differential pressure gauges which run on air and non-combustible compatible gases and are offered with the option of natural gas. In addition to this, these housing are fabricated by using die cast aluminum case and bezel, with acrylic cover. These have exterior finish with grey color to withstand 168 hour salt spray corrosion test.

Specifications :

• Accuracy: ±2% of full scale (±3% on – 0, -100 Pa, -125 Pa, 10MM and ±4% on – 00, -60 Pa, -6MM ranges), throughout range at 70°F (21.1°C).
• Pressure Limits: -20 Hg. to 15 psig.† (-0.677 bar to 1.034 bar); MP option:
• HP option: 35 psig (2.41 bar), 80 psig (5.52 bar).
• Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gages only.
• Temperature Limits: 20 to 140°F.* (-6.67 to 60°C).
• Size: 4 (101.6 mm) Diameter dial face.
• Mounting Orientation: Diaphragm in vertical position, Consult factory for
• Process Connections: 1/8 female NPT duplicate high and low pressure taps one pair side and one pair back.
• Weight: 1 lb 2 oz (510 g), MP & HP 2 lb 2 oz (963 g).
• Other position orientations.

Digital Differential Pressure Gauges

The series A1 digital differential pressure gage is a patent pending microprocessor based digital pressure gauge for positive, negative, and differential measurement designed to be a direct replacement for mechanical gauges. The Series A1 differential pressure gauges utilize an extremely stable piezoresistive sensing technology to give a standard full scale accuracy of 1%. For applications requiring better accuracy, the A1 is also available with 0.5% accuracy. The A1 pressure gauge also has an optional 4-20 mA output for applications requiring an output signal. The A1 features a bright ½” LED display, which gives the gauge improved readability and precision. The A1 digital differential pressure gauges also feature 5 user selectable engineering units including in. w.c., mm w.c., cm w.c., kPa, and Pa. The Series A1 offers an improved look, and performance compare to mechanical gauges for a similar price
Maximum Pressure:
4″ w.c. and less = 2 PSI; 5″ w.c. and above = 10 PSI
Media compatibility:
Air and compatible non combustible, non corrosive gasses
Accuracy*:
Axxx0-xx – 1.00%; Axxx1-xx – 0.50%; Axxx2-xx – 0.25%
Temperature Ranges: Compensated and Operating:
-10° to 140°F (-23° to 60°C)
Thermal Effect*:
+/- 0.012% FS/°F
Output Signal:
4-20 mA (option)
Loop Resistance:
750 Ω Max (for internally sourced power); 1800 Ω Max
(for externally sourced power of 36 VDC)
Power Supply:
Universal 24-240 VAC or VDC
Housing Material:
Glass Filled Nylon
Enclosure Rating:
Designed to meet NEMA 4X face; with optional
cover the entire product is weatherproof

Photohelic Gauges
Combines Differential Pressure Gage with Low/High Set-points
Features:

• Service: Air and non-combustible,compatible gases
• Wetted Materials: Consult factory
• Accuracy: ±2% of FS (3000-0 ±3% of FS). (3000-00 ±4% of FS)
• Pressure Limit: -20 Hg. to 25 psig (-0.677 bar to 1.72 bar). MP option
• 35 psig (2.41 bar), HP option; 80 psig (5.52 bar)
• Temperature Limits: 20 to 120°F (-6.67 to 48.9°C)
• Process Connections: 1/8 female NPT (duplicated side and back)
• Size: 4 (101.6 mm) dial face, 5 (127 mm) OD x 3-1/8 (79.38 mm)
• Weight: 1.8 Ib (816 g)

Using solid state technology, the Series 3000MR and 3000MRS Photohelic® switch/gages combine the functions of a precise, highly repeatable differential pressure switch with a large easy-to-read analog pressure gage employing the durable, time-proven Magnehelic® gage design. Switch setting is easy to adjust with large external knobs on the gage face. Gage reading is unaffected by switch operation — will indicate accurately even if power is interrupted. Solid state design now results in greatly reduced size and weight.

Air Velocity & Temperature Transmitter We are leading manuafcturer & Supplier
Features :

• Temperature and air velocity transmitter type CTV100.
• Ranges from 0-5 m/s to 0-30 m/s and 0 to 500 C, -20 to 800 C, -50 to 500 C, 0 to 1000 C
• 0-10 V or 4-20 mA output, active, power supply 24 Vac/Vdc (3-4 wires)
• ABS IP 65 housing, with or without display
• Alternating display pf air velocity and temperature
• Quick and easy mounting “1/4 turm” system with wall-mount plate

Applications

• Filter Status
• Duct Static Pressure
• Clean Room Pressure
• Building Pressure
• Fan and Blower Pressure
• Paint Booths
• Dust Collectors
• Glove Box Pressure
• Bubbler Systems
• Laminar Flow Hoods
• Cabinet Purging

 

Air Velocity TransmitterFeatures :

• Low Angular Dependence
• Easy Installation
• Adjustable To Application Requirements
• Range : 0 to 10 / 15 / 20 m/s
• Out put : 0 to 10V / 4 to 20 mA
• Temp. Range : 0 to 50 Deg C

Applications

• HVAC and Clean Room Monitoring
• Monitoring Incoming and Outgoing Air (energy Management) In HVAC Applications
• Filter Monitoring And Laminar Flow Control In Cleanrooms
• Exhaust Systems, Exhaust Hoods And Glove Boxes In The Pharmaceutical,
• Bio and Semiconductor Industries
• Mass Flow Measurement During Incineration Processes
• Monitoring and Measurement Of Compressed Air Systems
• Air Conveying Systems
• Wind Tunnels and Climate Simulators

Differential Pressure Transmitters are cost-effective, compact transmitters that reduce up front costs as well as expenses over the life of the product. These instruments not only alleviate cumbersome turn pots typically found in most transmitters, but eliminate entirely the need to span the instrument during calibration. With a single digital push button, both ZERO AND SPAN are calibrated properly, nothing else is required. No additional reference pressure sources and
separate calibration devices are necessary; no need to remove from service and
send to a lab. All that is required of the installer or user is to let the unit sit at zero
reference pressure, then push a button. That is it! The transmitter is now ready for
operation. Time savings are enormous over the life of the product compared to
traditional transmitters which require time to annually remove the product from
service plus the additional time to actually perform a complete full-span calibration.
Mounting is simple with integral mounting holes on the 616KD that are inherent to
the molded housing. The 616KD has the expanded capability to be mounted on a 35
mm DIN rail either via its side or back integral DIN rail clips. The Series 616KD has
easy-to-wire open screw terminals at the top of the housing. An optional protective
cap snaps directly to housing to cover terminals.
The One-Touch® family of Differential Pressure Transmitters are ideal for building
automation applications such as air handlers, duct pressure, variable air volume and
filter monitoring. Available models include ranges from 1 in w.c. to 20 in w.c.
depending on series.

SPECIFICATIONS
Service: Air and non-combustible, compatible gases.
Wetted Materials: Consult factory.
Accuracy: ±2% FS.
Stability: ±1% FS/year.
Temperature Limits: 32 to 122°F (0 to 50°C).
Pressure Limits: 2 psi (13.8 kPa).
Thermal Effect on Span: ±0.11% FS/°F (±0.19% FS/°C) typ.
Thermal Effect on Zero: 616KD-X0: 0.6%/°F (1%/°C); 616KD-X1: 0.3%/°F
(0.5%/°C); 616KD-X2: 0.2%/°F (0.33%/°C); 616KD-X3: 0.12%/°F (0.2%/°C);
616KD-X4: 0.06%/°F (0.1%/°C) FS max.
Power Requirements: 16 to 35 VDC (2 or 3 wire), 20 to 28 VAC (3 wire).
Output Signal: 4 to 20 mA or unit with field selectable 0 to 10 & 0 to 5 volt.
Zero and Span Adjustments: Push button.
Loop Resistance: DC=1000 Ω max.; AC=1200 Ω max.
Current Consumption: 21 mA max.
Electrical Connections: Screw-type terminal block.
Process Connections: Barbed, dual size to fit 1/8 & 3/16 (3 mm & 5 mm) ID
rubber or vinyl tubing.
Enclosure Rating: NEMA1 (IP10).
Mounting Orientation: Position insensitive.
Weight: 1.8 oz (51 g).

Differential Pressure Switch

The Series ADPS/EDPS Adjustable Differential Pressure Switch is designed for pressure, vacuum, and differential pressures. The dual scaled adjustment knob in inches water column and pascals allows changes to the switching pressure to be made without a pressure gage. The ADPS/EDPS is available with settings from 0.08 in w.c. (20 Pa) up to 20 in w.c. (5000 Pa). The silicone diaphragm and PA 6.6 body make the series ADPS ideal for use with air and other noncombustible gases. Series EDPS models meet UL508 and are constructed of plenum rated plastics. The compact size, adjustment knob and low cost make the ADPS/EDPS the perfect choice for HVAC applications.
Product Applications

• Monitoring air filters and ventilators.
• Monitoring industrial cooling-air circuits.
• Overheating protection for fan heaters.
• Monitoring flows in ventilation ducts.
• Controlling air and fire-protection dampers.
• Frost protection for heat exchanges.

We are Leading Manufacturer & Supplier Wet Differential Pressure Transmitter

Fiber body air cooler

Model no – hc20

Blade size – 20 inch

Tank capacity – 90 liters

Power consumption – 200 watts

Body type – fiber

Vooling pad – cellulose pads

Covring area – 1000 sqft

Wheels – 4 wheels attached

misting – na

Magnehelic Gauge Sensor

Magnehelic Gauge Sensor SS 304

SIZE 1/4′

Mounting Box For Magnehelic Gauges

Bracket is Surface Mounted. Steel With Gray Hammertone Epoxy Finish. For Use With Dwyer Series .